Highway Sustainability Research Center - CENCollege of Engineering 


Dr. Walaa S. Mogawer, P.E.

Professor and Head of Laboratory

Ph.D. University of Rhode Island, 1989
M.S. University of Rhode Island, 1984
B.S. Kuwait University, 1981

Dr. Walaa S. Mogawer Resume

Dr. Mogawer has over 20 years of research and practical experience in the design of different types of Hot Mix Asphalt (HMA), Superpave technology, Polymer modified asphalt mixes, pavement design, and pavement management. In addition to the HMA design and analysis, he has extensive experience in testing and evaluating the performance of different types of HMA using the simple performance test, servo-hydraulic systems, and Accelerated Pavement Testing devices (APT) such as Asphalt Pavement Analyzer, French Rut Tester, Hamburg Wheel Tracking Device, Model Mobile Load Simulator, and the Accelerated Loaded Testing Facility (ALF). Since joining UMass Dartmouth he has served as principal investigator on several research projects funded by MassHighway, New England Transportation Consortium (NETC), and National Science Foundation (NSF). He has been instrumental in establishing a state of the art pavement materials testing laboratory at UMass Dartmouth.

Recently, Dr. Mogawer has directed a laboratory and field evaluation of the first Warm Mix Asphalt (WMA) project that was placed in Massachusetts. Currently, he is working with the six New England States to develop a guideline regarding the use of thin lift overlay mixes with Polymer Modified Asphalt (PMA) in New England. These guidelines will include thorough research into the existing surface treatments and overlays being used in the New England States as well as development of PMA asphalt mixtures that can be used in lieu of the conventional surface treatments. A non-destructive testing method (NDT), the seismic property analyzer (SPA), will be explored to determine the optimum time to perform resurfacing. The NDT device can be utilized to diagnose the problems that lead to the surface distresses. Also, cost/benefit analysis of the various resurfacing options as compared with PMA overlays, and the strengths/weaknesses of particular PMA mixes will be conducted. Dr. Mogawer has been assisting the state of Massachusetts in its efforts of implementing the Superpave Mix Design System. He was involved in validating the Superpave mix design of five Superpave projects that were placed in Massachusetts. Furthermore, Dr. Mogawer was instrumental in developing a draft specification for placing OGFC in Massachusetts.

Dr. Mogawer is working with the six states of New England to evaluate the relationship between density and performance of HMA, particularly Superpave mixtures. In the past several years he has served as a consultant to the Federal Highway Administration (FHWA) on several studies. The most recent study determined the benefits of adding polymers to asphalt binders and validates asphalt binder tests and asphalt mixture tests that provide the relative performance of these materials. Other studies involved the use of the FHWA's Accelerated Loading Facility (ALF) to validate Superpave binder and mixture tests and other mixture tests that have been developed to predict rutting and fatigue of HMA, the evaluation of the effect of coarse aggregate content and mineral fillers on stone matrix asphalt and the evaluation of test methods that are used to quantify sand shape and texture. Dr. Mogawer has authored and co-authored several papers that have been published in the Transportation Research Record, ASCE Journal of Materials in Civil Engineering, and Journal of the Association of Asphalt Paving Technologists. He also, authored several funded research reports. Dr. Mogawer is a member of Transportation Research Board (TRB) Committee AFK50, Association of Asphalt Paving Technologists (AAPT), and American Society of Civil Engineers (ASCE).

Dr. Mogawer received B.S. degree in Civil Engineering from Kuwait University in 1981 and an M.S and a doctorate degree in Civil and Environmental Engineering from the University of Rhode Island in 1984 and 1989 respectively.

Dr. Mogawer is a member of the American Society of Civil Engineers, and the Association of Asphalt Paving Technologists.

Dr. Mogawer's research interest focus on:
Asphalt materials and mixtures
Pavement Design and Management
Traffic and transportation Engineering

Alexander J. Austerman, EIT

Research Engineer

B.S. University of Massachusetts Dartmouth, 2000

Mr. Austerman is the research engineer at the UMass Dartmouth Pavement Laboratory. Mr. Austerman has over six years of experience in Hot Mix Asphalt (HMA) mixture design, testing, and analysis. Beyond this experience, Mr. Austerman has been involved with numerous other HMA related projects. Moreover, his experience includes material testing and evaluation, specialized HMA mixture designs (SMA , OGFC, etc.), Superpave volumetric mix design, mix designs involving modified PG binders, dynamic modulus (E*) testing, rutting and fatigue testing of HMA, and PG binder testing. Mr. Austerman is responsible for the Accelerated Pavement Testing (APT) program at the Pavement Laboratory which is used to determine the performance of HMA using the Asphalt Pavement Analyzer and Model Mobil Load Simulator.

Mr. Austerman has authored co-authored numerous funded research project reports and conducted presentations related to the HMA discipline. Also, he has presented research results on a national level at the Transportation Research Board (TRB) annual meetings. He is a member of the Association of Asphalt Paving Technologists (AAPT).

Currently, Mr. Austerman is working towards a Professionals Engineer (PE) license and an advanced degree in Civil Engineering specifically related to Transportation and Pavements.

 Last Updated On: 11/16/06

Contact Info: